Manual Cleaning - Samsung SR8930 User Manual

Manual Cleaning

You can move the vacuum cleaning robot to clean a particular
location directly by using the remote control.
■
Move the vacuum cleaning robot to the location where you want to
perform manual cleaning.
■
You can manually clean using the remote control only.
Remote control button
• When the vacuum cleaning robot is docked with the
charger station, manual cleaning is not supported.
NOTE
• If there is no input for about 1 minute to switch to standby
mode.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
CAUTION
Turbo icon is turned on, you can start cleaning in Turbo
mode.
Confi guration Sequence
1. Set the mode.
2. Cancel the mode.
Directional Buttons Directional Buttons
(Forwards, Left, Right) (Forwards, Left, Right)
A backwards function is not A backwards function is not
supported. supported.
operating _31