4. OPERATION
NOTE:
Charge before first use, see section 4.5.
4.1.
TO TURN ON THE LIGHT: (FIG.2)
4.1.1.
Short press the main power button
to turn the light On/Off.
4.1.2.
There are 3 lighting modes: high, mid
and low. Keep pressing the
button until you reach the desired
setting.
4.2.
TO CONNECT A WIRELESS
ENABLED DEVICE (FIG.2)
4.2.1.
Press and hold the wireless activation
button for a couple of seconds until
wireless-on tone is heard.
4.2.2.
You can connect and play music
from your mobile phone, tablet or other portable audio device. Keep the button pressed to turn off.
4.3.
TO ADJUST VOLUME: (FIG.2)
4.3.1.
Press and hold plus (+) button to increase volume. Press and hold minus (-) button to reduce volume.
4.4.
TO MOVE FORWARD OR BACKWARD IN YOUR PLAYLIST: (FIG.2)
4.4.1.
Short press plus (+) button to move to the next song. Short press minus (-) button to go to the previous song.
4.5.
TO CHARGE THE LIGHT: (FIG.3)
4.5.1.
Open the transparent cover on the back of the
device. Plug a micro USB cable into the '5V' input
and connect it to a power adaptor, home
computer, laptop, etc. The indicator light will
be on to show the power capacity. 3 blue LEDs are
on when it is fully charged.
4.6.
TO CHARGE YOUR SMALL DEVICES: (FIG.3)
4.6.1.
Plug a USB cable into the '5V' Output at the base
of the light and connect it to your mobile phone,
camera, etc.
WARNING! DO NOT connect your small devices to charge while the power bank is being charged.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.3
5V Charger Input
Indicator lights
USB Output Socket
01284 703534
sales@sealey.co.uk
Original Language Version
(Hold)Volume up
(Press) Forward Skip (+)
Wireless Activation
(Press) Backwards Skip (-)
(Hold) Volume Down
Light On/Off
fig.2
www.sealey.co.uk
LED100WS.V2 Issue 1 27/01/20