Table of Contents
Advertisement
On the Unit's Display (Continued)
F74
F75
U59
U61
U76
U80, U81, U99
U88
X HOLD
On the TV
Cannot finish recording completely.
Copy-protect signal was detected.
Disc is full, or maximum number of titles
are recorded.
Cannot finish recording completely.
Cannot record.
Maximum number of titles exceeded.
No cassette.
The cassette is write-protected.
Cannot playback.
TV system is different from the setting.
To playback, please change the TV System
in Setup.
Cannot play on this unit.
No Disc
Now recording on DVD.
To watch pictures on VHS, use AV1 socket,
and switch to an appropriate AV channel
on your TV.
This is a non-recordable disc.
Unable to format.
This disc is not formatted properly.
Format it using DVD Management
in FUNCTION MENU.
$
≥ The HDMI connection could not be authenticated due to a transfer malfunction.
If you have another HDMI cable, try to use it. If it remains displayed, consult the
dealer where the unit was purchased.
≥ The HDMI connection could not be authenticated due to an internal data
malfunction. If you have another HDMI cable, try to use it. If it remains
displayed, consult the dealer where the unit was purchased.
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
≥ (When a disc is not inserted) Displays when a malfunction has occurred. This is
displayed when the unit is in the recovery process to return to normal operation.
Once the display disappears you can use the unit again.
If it remains displayed, consult the dealer where the unit was purchased.
≥ HDMI cannot be output because this unit is connected to a model that does not
support copyright protection.
≥ The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit
to standby mode. Press [Í/I] on the main unit again to turn the unit on.
≥ There was something unusual detected with the disc while recording, playing or
copying; there was a power failure or the AC mains lead was disconnected while
the unit was on. The unit is carrying out its recovery process. This process restores
the unit to normal operation. Wait until the message disappears.
If it remains displayed, consult the dealer where the unit was purchased.
≥ The Child Lock function is activated.
Press and hold [OK] and [RETURN
disappears. (
74)
≥ The programme was copy-protected.
≥ The disc may be full.
≥ The maximum number of title has been exceeded. (
≥ [RAM] [-RW‹V›] [+RW] Create space by erasing unwanted titles.
Even if you erase recorded content from the DVD-R, DVD-R DL, +R or +R DL
there is no increase in disc space. Available recording space on a DVD-RW
(DVD-Video format) or +RW disc increases when the last title is deleted (space
may increase slightly when you delete other titles). (
≥ Use a new disc.
≥ There is no video cassette in the tape deck when playing or recording TV
programmes. Insert a video cassette. (
≥ A video cassette without a secure accidental erasure prevention tab is inserted
when recording programmes. Use a video cassette with a secure accidental
erasure prevention tab. (
≥ You tried to play a title recorded using a different encoding system from that of
the TV system currently selected on the unit.
Alter the "TV System" setting on this unit to suit. (
≥ You tried to play a non-compatible image. (
≥ The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
≥ Ensure the disc is flat in the tray.
≥ The VHS plays back while recording on DVD. You can watch the VHS playback
by connecting 21-pin Scart cable from AV1 on the unit to the television.
VHS cannot be output via "DVD priority out" while recording to DVD. (
≥ The disc may be dirty or scratched. (
≥ The unit cannot record on the disc you inserted. Insert a DVD-RAM or
unfinalised DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, R DL or
+RW disc. (
15)
≥ You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.
Format the disc with the unit. (
≥ The operation is prohibited by the unit, disc or video cassette.
] at the same time until "X HOLD"
28)
26, 50, 64)
7)
7)
70)
18)
7)
64)
75)
81
VQT2J51
Advertisement
Table of Contents
