Emission Control Systems - Polaris RANGER 570 2017 Owner's Manual For Maintenance And Safety

EMISSION CONTROL SYSTEMS

Noise Emission Control System
Do not modify the engine, intake or exhaust components, as doing so may affect compliance
with governmental noise level requirements.
Spark Arrester
Your POLARIS vehicle has a spark arrester that was designed for on-road and off-road
operation. It is required that this spark arrester remain installed and functional when the
vehicle is operated.
Exhaust Emission Control System
Exhaust emissions are controlled by an electronic fuel injection (EFI) system. The engine
and EFI components are set at the factory for optimal performance and are not adjustable.
Electromagnetic Interference
This vehicle complies with the EMC requirements of European directives 97/24/EC and
2004/108/EC.
Non-ionizing Radiation: This vehicle emits some electromagnetic energy. People with active
or non-active implantable medical devices (such as heart monitoring or controlling devices)
should review the limitations of their device and the applicable electromagnetic standards
and directives that apply to this vehicle.
European Vibration and Noise
The driver-perceived noise and hand/arm and whole body vibration levels of this machinery
is measured per prEN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as indicated by the
test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
60