Table of Contents
Advertisement
Installation
Unpacking and Preparing the TV
Remove the TV carefully from its packaging, be careful not to apply any pressure to
the front of the LCD screen. Some accessory items may be located in cut-out sections
of the internal packaging, so make sure you check the entire packaging to not miss
any items. Once all items are removed from the packaging, use the list below to check
there are no items missing.
1 x 40" (101cm) FHD LED LCD TV
2 x Base stands
1 x Remote control
2 x "AAA" size batteries
1 x Composite AV cable
4 x Screws (for assembling the base stands to the TV)
1 x Instruction manual
1 x Warranty Card
Once all the accessory items have been accounted for, prepare your TV for installation
– you can either use it standing up on the supplied base stands on suitable furniture,
or mounted to a wall. You will find installation instructions for both options on the
following pages.
The TV panel may be awkward to install on your own. We recommend you ask
someone to help with installation and/or removal of the stands, or with wall-
After having installed the base stands (or wall-mounted the TV), follow the instructions
in the "Controls and Connections" section to ensure that you TV is correctly
connected to your TV antenna and related AV equipment (e.g., Blu-ray player,
amplifier, sound bar, etc.).
14
IMPORTANT!
mounting the TV set.
After Sales Support
Telephone:
1300 886 649
Email:
info@tempo.org
Advertisement
Table of Contents
