Advertisement
Quick Links
This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98SE
Before You Begin
You must have at least the following:
•
You will need a computer with an available USB port to connect the
DWL-G122 Wireless USB adapter.
•
At least a 500 MHz processor and 62 MB of memory
•
An 802.11b or 802.11g Access Point (for Infrastructure Mode) or another 802.
11b or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
•
Properly installed and working USB Controller.
Check Your Package Contents
These are the items included with your DWL-G122 purchase:
If any of the above items are missing, please contact your reseller.
@2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice.
DWL-G122 Wireless USB Adapter
CD-ROM (containing Drivers, Manual and Warranty)
Cradle
1
DWL-G122
AirPlus G
High Speed 802.11g
USB Wireless Adapter
TM
Advertisement
Related Manuals for D-Link AirPlus G DWL-G122
Summary of Contents for D-Link AirPlus G DWL-G122
- Page 1 CD-ROM (containing Drivers, Manual and Warranty) Cradle If any of the above items are missing, please contact your reseller. @2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
- Page 2 Antenna Used to wirelessly connect to 802.11b or 802.11g networks. Insert the D-Link CD-ROM Into Your Computer install Turn on the computer the DWL-G122 Insert the D- Link AirPuls G DWL- USB Adapter into your G122 Driver CD in the CD-ROM drive.
- Page 3 The letter “D” If the CD Autorun function does not represents the automatically start on your computer , letter of the CD-ROM type “D:\Driver\Setup.exe” If it does drive. Your CD-ROM start, proceed to the next screen. drive may be a different drive letter.
-
Page 4: Your Computer
Click Continue Anyway Click No, I will restart my computer later Click Finish Shut down your computer Installing the DWL-G122 Wireless USB Adapter to Your Laptop Computer Make sure to turn off your computer. Insert one end of the USB Adapter into the provided USB cable and plug the other end into your computer’... -
Page 5: Restart Your Computer
Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) screen will appear: Select Install the software automatically (Recommended) Click Next Windows XP will automatically load the driver files. Click Continue Anyway Click Finish... - Page 6 Your Installation is Complete! After you’ ve continued in Windows XP (or after the computer restarts in the other Windows operating systems), the D-Link AirPlus DWL-G122 Con- figuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon...
- Page 7 Appendix Using the Configuration Utility Status: Displays the Frequency MAC Address of the SSID The Service Set Identifier Displays the current Access Point that is is the name assigned to the frequency used by associated with the wireless network. The factory the adapter.
- Page 8 Appendix Using the Configuration Utility (cont.) SSID: The Service Set Identifier is the name as- Wireless Mode: signed to the wireless Data Encryption: The factory setting is network. The factory SSID default setting is set to set to Infrastructure. setting is set to default. Make Disabled.
- Page 9 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. "D-Link declare that DWL-G122 (802.11g/2.4GHz Wireless USB Adapter) is limited in CH1~CH11 by specified firmware controlled in USA." The equipment has been SAR-evaluated and authorized for use in laptops / notebook...