Table of Contents
Advertisement
GASKET
TUB GASKET
CLAMP
8. Unscrew the screw from the lower side of the CABINET
COVER.
9. Tilt the CABINET COVER.
10. Disconnect the DOOR S/W connector.
※ ※ NOTE: When assembling the CABINET
COVER, connect the connector.
11. Lift and separate the CABINET COVER.
1. Disassemble the CABINET COVER
(refer to page 32).
2. Disassemble the CLAMP ASSEMBLY.
3. Disassemble the GASKET.
34
Advertisement
Table of Contents
Troubleshooting
