Replace the Remote Control Battery
•
The remote control requires a
CR2025, 3V Lithium battery.
1
Push the tab on the side of the
battery tray towards the tray.
2
Now slide the battery tray out of the
remote control.
3
Remove the old battery. Place a new
CR2025 battery into the battery
tray with the correct polarity (+/-) as
indicated.
4
Slide the battery tray back into the
slot in the remote control
Precautions Concerning Batteries
•
When the Remote Control is not to
be used for a long time (more than a
month), remove the battery from the
Remote Control to prevent it from
leaking.
•
If the batteries leak, wipe away
the leakage inside the battery
compartment and replace the
batteries with new ones.
•
Do not use any batteries other than
•
Do not heat or disassemble batteries.
•
•
Do not carry or store batteries with
other metallic objects. Doing so
could cause batteries to short circuit,
leak or explode.
•
Never recharge a battery unless it is
10
EN
Placement
Place the subwoofer at least 1 meter (3
feet) away from your soundbar, and 10
centimeters away from the wall.
For best results, place your subwoofer as
shown below.