Adjusting The Recording Sound - Sony DVCAM DSR-200AP Operating Instructions Manual

Adjusting the recording sound

You can adjust the recording sound level. Use headphones (not supplied) to monitor
the sound when you adjust.
Selecting and setting audio mode
You can record sound using channel 1 and channel 2.
Select sound input using the LINE/MIC switch as follows:
MIC FRONT: When recording from the built-in microphone or external microphone
MIC REAR: When recording from external microphone connected to AUDIO IN CH-1
LINE:
LINE/MIC switches position and recording sound
LINE/MIC switch
position
CH-1
MIC FRONT
MIC REAR
LINE
* External microphone connected to MIC (PLUG IN POWER) jack. This "–" means no connection.
Notes on recording
•Be sure to set LINE/MIC positions properly, otherwise no sound will be recorded.
•When nothing is connected to the XLR connector and you set the LINE/MIC switch to
MIC REAR, a noise may occur.
•When both CH-1 and CH-2 LINE/MIC switches are set to FRONT, both audio level of
CH-1 and CH-2 are adjusted by CH-1 REC LEVEL dial.
AUDIO IN CH-1
AUDIO IN CH-2
connected to MIC (PLUG IN POWER) jack.
or/and CH-2.
When recording from line-in connected to AUDIO IN CH-1 or/and CH-2.
Microphone
type*
CH-2
MIC FRONT —
Stereo
Monaural
LINE —
Stereo
Monaural
MIC REAR —
Stereo
Monaural
MIC REAR —
LINE —
MIC FRONT —
Stereo
Monaural
LINE —
MIC FRONT —
Stereo
Monaural
MIC REAR —
Recording
sound
CH-1
Built-in mic: L
External mic: L
External mic: Mono
Built-in mic: L+R
External mic: L+R
External mic: Mono
Built-in mic: L+R
External mic: L+R
External mic: Mono
XLR MIC
XLR MIC
XLR MIC
XLR LINE
XLR LINE
XLR LINE
MIC (PLUG IN POWER)
Built-in microphone
CH-1 LINE/MIC
CH-2 LINE/MIC
CH-2
Built-in mic: R
External mic: R
External mic: Mono
XLR LINE
XLR MIC
XLR MIC
XLR LINE
Built-in mic: L+R
External mic: L+R
External mic: Mono
XLR LINE
Built-in mic: L+R
External mic: L+R
External mic: Mono
XLR MIC
65