•
Do not remove or add attachments on a slope.
•
Do not park the machine on a hillside or slope.
Leveler Safety
•
Always lower the attachment each time you shut
off the machine or leave the operating position.
•
Clean any dirt or debris that may hinder connecting
the attachment to the machine. Ensure that the
attachment-locking pins are fully seated in the
holes of the attachment-mount plate. Refer to the
Operator's Manual for the machine for detailed
information on safely connecting an attachment to
your machine.
•
When lifting the attachment keep it level and
prevent the load from spilling backward.
•
Do not allow anyone to stand on the attachment or
ride it in any way.
•
For wheeled traction units, the attachment can be
used with or without the counterweight.
Maintenance and Storage
Safety
•
Check fasteners at frequent intervals for proper
tightness to ensure that the equipment is in safe
operating condition.
•
Refer to the Operator's Manual for important
details if you store the attachment for an extended
period of time
•
Maintain or replace safety and instruction labels,
as necessary.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Tipping hazard—read the Operator's Manual; do not
exceed loads of 150 kg (330 lb); for TX 413 models, do not
exceed loads of 100 kg (220 lb).
4
110-0081
133-8061
decal110-0081
decal133-8061