Table of Contents
Advertisement
100Mbps connection. The connection is accomplished from the hub's uplink
(MDI-II) port to any of DSS-16+'s 1~16 (MDI-X) ports.
A. 10BASE-T Hub
For a 10BASE-T hub, DSS-16+ LED indicators should light up as the
following:
"FDX/COL" LED indicator is OFF.
"LINK/ACT" LED indicator lights amber.
B. 100BASE-TX Hub
When connecting to a 100BASE-TX hub, DSS-16+ LED indicator should
light up as the following:
"FDX/COL" LED indicator is OFF.
"LINK/ACT" LED indicator lights green.
Hub without Uplink (MDI-II) port
If a hub is not equipped with an uplink (MDI-II) port, connection can be
made using either straight cable or crossover cable.
A. Using straight cable
When using straight cable, the connection can be made from Switch's uplink
(MDI-II) port to any port of the Hub.
B. Using crossover cable
When using crossover cable, the connection can be made from any regular
ports of DSS-16+ to any port of the Hub.
Switch to Switch (other devices)
DSS-16+ can be connected to another switch or other devices (routers,
15
Advertisement
Table of Contents
