<<CAUTION POINT>>
1. The leads should not be too close to the anode leads.
(Be separated at least 10mm.)
2. The anode leads should be separated at least 10mm from the CRT,
Back Cover, DY, Circuit Board and so on.
3. The focus screen lead should not touch CY fixed screw.
4. The lead wires should not touch Headsink and hot parts as
following.
DEG lead
AC2 lead
RT2 lead
DEG pin, R801, R800
SP lead
DEG pin, R801, R800
6. Location of Lead Wiring (CT-34WX52)
Tuner, IC4803
Tuner, IC4803, IC2302 of heatsink
14