Sony RNPK-4 Help Manual page 26

Tap [OPTION] － [Preference of temperature].
3
Set the temperature preference.
4
Set your temperature preferences for [COOL] and [WARM], respectively.
Once the setting is made, cooling/warming operation will start. The unit automatically adjusts the temperature of the
cooling/warming section while switching between cooling operation and warming operation automatically.
When warming operation has continued for about 1 hour, operation is paused for about 1 minute, and then resumes
automatically.
Target temperature (
on the temperature preference that you have set).
Unit icon ( -b): Indicates the current temperature of the cooling/warming section. The circle around the unit
icon indicates the intensity of cooling/warming. When the unit automatically pauses the cooling/warming
operation to save power, the icon becomes translucent.
To stop cooling/warming, tap [OFF].
5
To set the temperatures at which cooling/warming operation switches
In SMART COOL ⇔ WARM MODE, you can set the reference temperatures at which the operating mode switches from
cooling to warming and from warming to cooling.
1. Tap [OPTION] － [Switching Temperatures].
2.
Set the switching temperatures by sliding the boxes to the left and right of the temperature bar.
The temperature for switching to cooling operation cannot be set lower than the temperature for switching to
warming operation.
3.
Tap [Done].
Note
When the following abnormalities are detected, the cooling/warming operation automatically stops (the LED flashes in red for
about 8 seconds).
The temperature inside the unit rises more than expected.
The temperature of the cooling/warming section drops or rises more than expected.
The fan inside the unit is not working properly.
For details, refer to "When the LED flashes in
Hint
The exhaust volume of the fan is automatically controlled according to the temperature inside the unit.
You can stop cooling/warming by pressing and holding the button on the unit for about 2 seconds. It is useful when your
smartphone is running out of battery.
You can set a series of actions to alternate between cooling and warming (MY MODE).
Related Topic
SMART COOL settings
WARM settings
SMART WARM settings
Using MY MODE
-a): Indicates the target temperature range of the cooling/warming section (depending
red."
26