Honda Accord Hybrid 2014 Manual page 354

Release button
■
How to Charge (Level 2)
Charge Lid
Release
Button
■
When charging is completed
Press the release button on the charge
connector to release it from the inlet.
The charge indicator goes off once charging is
completed.
1. Stop your vehicle at a station specified for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver's door.
2. Move the shift lever to P .
(
3. Turn off the power system.
4. Press and hold the charge lid release
button.
u The lid opens.
uuCharginguCharge the High Voltage battery using a Level 1 or 2 charger
1Charging
If available, select a 240 volt charger when charging.
Using a 240 volt charger takes less time than using a
120 volt charge.
If the ambient air is cold enough to lower the High
Voltage battery temperature below -22F
charging may not start.
1Charge the High Voltage battery using a Level 1 or 2 charger
If you cannot start charging even if the charge
connector is plugged into the inlet, check the
following:
•
If the charging timer has been set.
To avoid damage to the charger, follow these
precautions:
•
Do not hit the charge connector components with
a hard object or drop them on the ground.
•
Do not pull, twist, tangle, drag or step on the
charging cable.
•
Do not use or store near any sources of heat.
•
Do not expose to liquids or use harsh chemicals to
clean.
If you unplug the charge connector from the inlet,
charging cancels automatically.
Continued
° (-30°C)
,
353