Advertisement
TECHNICAL DATA
Rated voltage
Stroke rate under no-load
Lengths of stroke
Max blade length
Weight - not including battery pack
Measured values determined according to EN 62841:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Vibration emission value a
h
Cutting board
Uncertainty K
Cutting wooden beam
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1820R
L1820S
L1825R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
Use AEG 18V battery and charger only
WARNING!
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR PRUNING SAW
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live" wire
PRUNING SAW
Compatible charger
(not included)
AL18G
BL1218
BLK1218
BL18DPS
BL18S
15
may make exposed metal parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
against your body leaves it unstable and may lead to loss of control.
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is
running.
Always use the protective shields on the machine.
The dust produced when using this tool may be harmful to health. Do
not inhale the dust. Wear a suitable dust protection mask.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft materials
(wood, light building materials for walls). Harder materials (metals)
must first be drilled with a hole corresponding to the size of the saw
blade.
Always place the guide shoe on the workpiece when sawing.
When working in walls, ceiling, or floor, take care to avoid electric
cables and gas or water pipes.
Ambient temperature range for tool during operation is between 0°C
and 40°C.
Ambient temperature range for tool storage is between 0°C and 20°C.
A18PS1
18 V
0-3000 min
-1
19 mm
9"
2. 1 kg
L
= 84.5 dB(A)
A
p
5 dB(A)
L
= 95.5 dB(A)
WA
5 dB(A)
15.4 m/s
2
1.5 m/s
2
15.7 m/s
2
1.5 m/s
2
15
Advertisement
