Table of Contents
Advertisement
Main lighting
Dipped beam headlamps
With the ignition on, place the control
in this position.
Lighting control stalk
The headlamp dipping action of the lighting
control stalk can be used in two ways:
● With the vehicle started, pull the stalk briefly
toward you to flash the headlamps.
● With the dipped beam headlamps
on: pull the stalk toward you to
change to main beam.
To change back to dipped beam: pull the stalk
toward you again.
Get to know your E-MEHARI
Rear foglamp
To switch on the rear foglamp:
Place the main lighting control at this
position.
Press the rear foglamp button (1).
To switch off the rear foglamp: press button (1)
again.
Using the rear foglamp is prohibited
under conditions of normal visibility, by
day or by night.
In such conditions, the brightness of the
lamp could dazzle other drivers.
Don't forget to switch off your rear
foglamp once its use is no longer
necessary.
1
21
Advertisement
Table of Contents
