Switching The Screen Display (Shooting) - Sony DSC-HX350 How To Use Manual

Note
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject is very
close, the lower flash effect may not be visible.
[33] How to Use

Switching the screen display (Shooting)

You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes as
follows:
Graphic Display → Display All Info. → No Disp. Info. → Histogram → Level → Graphic
Display
Graphic Display
Display All Info.
No Disp. Info.
Using shooting functions Selecting a screen display mode