Hook Switch Sensor Actuator; Speaker - Brother FAX218 Service Manual

1.15 Hook Switch Sensor Actuator

(1) Press the lower section of the hook switch sensor actuator to the left to release the
latch from the main frame, then swing it upwards.
(2) Remove the spring.

1.16 Speaker

(1) Disconnect the speaker harness from the main PCB.
(2) Lift up the speaker.
Hook switch sensor
actuator
1
Latch
Speaker
(Front)
Main PCB
Hook switch sensor actuator
Latch
(Rear)
2
IV – 27