Table of Contents
Advertisement
5. Press
to complete the timer setting.
Be close to the indoor unit.
• To cancel the timer setting during the procedure, press
again.
6.1. Weekly timer
Setting details
1. Select Weekly timer in step 2 of "Timer setting procedure".
2. Press
to select the program number and the
(
)
day of the week.
Selected program number (1 to 4) and the day of the week will blink.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3. Press
.
4. Press
to choose the timer operation.
(
)
(Without a timer)
(On timer)
5. Press
.
* When you choose "Without a timer" in step 4, the setting display
will return to step 1.
6. Press
to set on time or off time.
(
)
7. Press
.
* When you choose "Off timer" in step 4, the setting display will
return to step 1.
8. Press
to set the temperature.
(
)
Temperature setting range
Auto, Cooling, or
18.0°C to 30.0°C
Dry mode:
*Even if you set to 10.0°C, 16.0°C to 17.5°C,
the air conditioner will run at 18.0°C.
Heating mode:
10.0°C or 16.0°C to 30.0°C
9. Press
.
The setting display will return to step 1.
10. Press
to complete the setting.
Be close to the indoor unit.
NOTES: [
] indicator on the indoor unit will not turn on even if the
setting is complete.
• If you want to return to the previous step, press
• To check the schedule, use
timer settings in step 1.
To fi nish checking, press
• To deactivate the Weekly timer, press
shown on the remote controller display.
The indicator will disappear.
NOTES:
• The operation modes will be the same as the mode at the last time
operation was stopped, so Cooling → Heating → Cooling → Heating
type of operations cannot be set automatically.
• If you set the On timer and Off timer on the same time, the On timer
will work.
• If two On timers are set on the same time, the air conditioner will run
in the order of the program number.
Program number
Day of the week
(Off timer)
.
to browse the Weekly
(
)
.
while
• You cannot use the Weekly timer and the other timers
simultaneously.
If you use the On/Off timer, the Program timer, or the Sleep timer
while the Weekly timer is activated, the Weekly timer will be
deactivated.
In such a case, activate the Weekly timer after the other timer
fi nishes.
• If the wired remote controller (optional) is connected, this function is
restricted.
Examples of Weekly timer
Example 1
7:00
Monday
Program
Program
to
1
Friday
On
26°C
Wake up Leave for
work
Saturday
Sunday
Program
(On)
(On)
Example 2: You can specify temperature settings using the On timer in
the Weekly timer.
7:00
9:00
Program 1
Program 2
On
On
28°C
26°C
6.2. On timer or Off timer
1. Select On timer or Off timer in step 2 of "Timer setting
procedure".
2. Press
(
Pressing the button: The time will change by +5/-5 minutes.
Pressing down the button: The time will change by +10/-10 minutes.
• To deactivate the On/Off timer, press
shown on the remote controller display.
The indicator will disappear.
6.3. Program timer
1. Set the On timer and Off timer. (Refer to "6.2. On timer or Off
timer").
2. Select Program timer in step 2 of "Timer setting procedure".
The timer whose setting time is closer to the current time works fi rst.
The order of the timer operation is displayed as follows:
Timer
On→Off timer
Off →On timer
NOTE: You can set the Program timer only within a span of 24 hours.
is
6.4. Sleep timer
1. Select Sleep timer in step 2 of "Timer setting procedure".
2. Press
(
stops.
Each time you press the button, the time changes as follows:
0H
1H
30M
00M
(H: h, M:min)
• To deactivate the Sleep timer, press
on the remote controller display.
The indicator will disappear.
9:00
11:00
17:00
Program
2
3
Off
On
28°C
Come back
home
(No timer settings)
Program
Program
1
2
3
Off
Off
Off
(On)
(On)
17:00
Program 3
Program 4
On
27°C
to set on time or off time.
)
while
Indicator on the remote controller display
to set the time until the operation
)
2H
3H
5H
7H
00M
00M
00M
00M
while
23:00
Program
4
Off
Go to
sleep
Program
4
Off
23:00
On
28°C
is
9H
00M
is shown
En-6
Advertisement
Table of Contents
