Table of Contents
Advertisement
Symptom
Lint on clothes
Items still wrinkled
after Wrinkle Prevent
Odors remain in items
after Cool Air
Information codes
If the dryer fails to operate, you may see an information code on the display. Check the
table below and try the suggestions.
Information code
tC
tC5
dC
HC
9C2
5C
For any codes not listed above, or if the information code continues to appear, call for
service.
Untitled-2 45
• Make sure the lint filter is clean before every load.
• Dry lint-producing items (fuzzy towels) separate from lint
trappers, such as black linen pants.
• Divide larger loads into smaller loads.
• Small loads of 1-4 items work best.
• Load fewer items. Load similar type items.
• Make sure to thoroughly wash items with strong odors.
Meaning
Air temperature sensor issue
Compressor temperature
sensor issue
Running the dryer with door
open
Compressor overheat
Low voltage detected
Water tank full
Drain pump is out of order
Action
Action
Clean the lint filter and/or heat
exchanger filter. If this continues, call
for service.
Wait 2-3 minutes. Turn the power on
and restart.
Close the door and restart.
If this continues, call for service.
Call for service.
Check if the power cord is plugged
in. If this continues, call for service.
Empty the water tank, turn the
power on, and restart. If this
continues, call for service.
English 45
2017-03-20
6:23:16
Advertisement
Table of Contents
