Manual Connect Option; Disconnect Option - Pioneer DVD-V7400 Software Manual

By pressing the Auto Connect button, the computer detects the DVD player and auto-
sets the port and rate selections. The connections are confirmed when the selections
are revealed in the Communication Setting box. The example below shows the port
as Com 2 with a signal rate of 4800 bps as the detected communication settings.

2.2.2 Manual Connect Option

Follow the instructions below to manually set the communication connections.
1. Launch the DataMan2 program.
2. Click on a port option.
3. Click on a rate option.
4. Click on the Auto Connect button to initiate the communication settings.

2.2.3 Disconnect Option

If the DVD player is removed or exchanged with another unit, click on the Disconnect
button before moving the current player.
DataMan2_OI_104.doc
Click on Accept for the End User License Agreement to continue.
DataMan2
Operating Instructions
Page 4 of 35