Using The Sleep Function; Switching The Unit To Sleep Mode; Turning The Musiccast Client On Again - Yamaha MusicCAT MCX-A10 Owner's Manual

Using the Sleep function

You can set your MusicCAST client in Sleep mode
when you are not using it. Power consumption is
reduced in Sleep mode, but the MusicCAST client
still consumes a small amount of power to keep the
display and the remote control signal receiver in
operation.
You can place the unit in sleep mode by carrying
out the procedure below:
DIGITAL AUDIO TERMINAL MCX–A10
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– VOL +
PHONES
I Switching the unit to sleep mode
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
Top Menu
Play
MENU
Recall Play
Edit Bookmark
Setup
Input
2.
Use u / d to move the cursor to "Sleep"
and press SELECT.
The Sleep prompt appears on the display.
Sleep
Press SELECT to sleep.
SELECT
SLEEP OFF TIMER SLEEP
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
STOP
7
PLAY
MENU
S
PLAY
MENU
INFO.
GROUP GROUP
SELECT
u / d
BOOK INPUT
MARK
RECALL MUTE
SELECT VOL
3.
Press SELECT.
The MusicCAST client switches to sleep mode,
and the current time appears on the display.
SELECT
You can also switch the unit to sleep mode by
pressing SLEEP on the remote control. The
time does not display correctly if the
MusicCAST client is not able to establish a
good connection with the MusicCAST server. If
the time displayed is not correct, alter the date
and time settings on the MusicCAST server to
display them correctly (See page 117 in the
MCX-1000 owner's manual for an explanation
of how to do this).
I Turning the MusicCAST client on again
Press SLEEP on the remote control or
SELECT on the MusicCAST client.
The MusicCAST client turns on.
Note
• The MusicCAST client automatically places itself
in sleep mode if you do not use it for 30 minutes.
63
MusicCAST settings
Please wait.