Switching The Xm Channel Select Mode; Switching Between The Detail Information Display And Preset List Display; Storing And Recalling Broadcast Stations; Selecting A Channel - Pioneer Super Tuner IIID AVH-P6000DVD Operation Manual

Section
12 XM tuner (GEX-P920XM)
Notes
! If you do not use the touch panel keys for 30
seconds, they will be hidden automatically.
! You can go to the next group of touch panel
keys by touching d.
Switching the XM channel
select mode
You have two methods for selecting a channel:
ALL CH mode and CATEGORY mode.
When selecting ALL CH mode, channels in
any category can be selected. Select
CATEGORY mode to narrow your search down
to only channels in a particular category.
% Touch MODE to select the desired chan-
nel select mode.
Touch MODE repeatedly to switch between
the two modes.
ALL CH (all channel select mode)—
CATEGORY (channel category select setting)
Switching between the
detail information display
and preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch LIST.
Touch LIST repeatedly to switch between the
followings:
Detail information display—Preset list display
—OFF
54
En
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys P1
to P6 you can easily store up to six broadcast
stations for later recall with the touch of a key.
1 Select the channel that you want to
store in memory.
2 Touch LIST to display the preset list.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
3 Touch and hold a preset tuning key P1
to P6 until the XM preset number stops
flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
The next time you touch the same preset tun-
ing key P1 to P6 the station is recalled from
memory.
Notes
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P1 to P6 when
the ALL CH mode is selected.

Selecting a channel

Selecting a channel in the
channel category
1 Touch MODE to select the channel cate-
gory select mode.
CATEGORY appears on the information bar.