Table of Contents
Advertisement
Display the ID Code (RADIO ID)
Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when
activating XM service or when reporting a problem. How to display the ID Code depends
on the Channel Select mode.
7 Channel Number Select mode
If you select "CH 00", the ID Code is displayed.
• Select the Channel Number zero (CH 00) with the 2 2 /3 3 buttons.
7 Channel Category Select mode
"RADIO ID" is provided as a Channel Category for displaying the ID Code.
• Select the Channel Category "RADIO ID" with the 5 5 /∞ ∞ buttons.
Note:
• If you select another Channel, display of the ID Code is canceled.
• Display of the ID Code repeats displaying "RADIO ID" and the ID Code one after the other.
Messages
When problems occur with XM tuner, a message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action.
Message
ANTENNA
UPDATING
NOSIGNAL
LOADING
OFF AIR
– – – – – – – –
– – – –
Possible cause
The XM antenna is
not connected.
A short-circuit occurring in
the antenna or the surrounding
antenna cable.
Radio is being updated with
latest encryption code.
XM signal is too weak at the
current location.
Unit is acquiring audio or
program information.
The channel currently selected
has stopped broadcasting.
The user has selected a Channel
Number that does not exist or is
not subscribed to.
There is no artist name/feature,
song/program title, or additional
information associated with the
channel at that time.
Recommended action
Check whether the XM antenna cable
is attached securely.
Make sure that there is nothing unusual
with the antenna or antenna cable.
Wait until encryption code is being
updated. Channels 00 and 01 should
function normally.
Wait until the car reaches a location
with a stronger signal.
Wait until the unit has received the
information.
Select another channel.
Automatically switches to Channel 01.
No action needed.
24
Advertisement
Table of Contents
