Honda CR-V 2021 Owner's Manual page 90

uuIndicatorsu
Indicator Name
Shift Lever
Position
Indicator
Transmission
System Indicator
Seat Belt
Reminder
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
88
On/Blinking
● Indicates the current shift lever
position.
Comes on for a few seconds when
●
you turn the ignition switch to ON
w ( *1 , then goes off.
● Blinks if the transmission system
has a problem.
Comes on and the beeper sounds
●
if you are not wearing a seat belt
when you turn the ignition switch
to ON *1 .
( w
If the front passenger is not
●
wearing a seat belt, the indicator
comes on a few seconds later.
Blinks while driving if either you or
●
the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
Explanation
2 Shifting P. 480
Blinks while driving - Avoid sudden
●
starts and acceleration and have your
vehicle checked by a dealer immediately.
The beeper stops and the indicator goes
●
off when you and the front passenger
fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat belt
- A detection error may have occurred in
the sensor. Have your vehicle checked by
a dealer.
2 Seat Belt Reminder P. 43
Message
—