Motorola VM75-2 User Manual page 17

4.3.8 View camera
If you have more than one camera paired with the Parent Unit, to select the
transmission image from a specific camera, proceed as follows:
1. Press the M MENU button when the Parent Unit is in camera viewing
mode.
2. Press the < LEFT/> RIGHT button to select view camera icon
3. Press the + UP /- DOWN button to select the number of the camera that
you wish to view, or the scan icon to view each paired camera in sequence
at about 20 seconds interval.
4. Confirm with the OK button.
4.3.9 Two-way communication
The Parent Unit has a two-way communication function. To activate two-way
communication function, hold down the
into the unit. The words speak will be heard on the camera. To deactivate two-
way communication function, release the
4.3.10 Remote Pan Scan
The baby monitor and camera with pan scan to keep an eye on your
child from a 5" diagonal video screen, you can remotely pan scan the
video image as needed
1. Press the OK button to enter scan mode
2. Press the < LEFT/> RIGHT button to pan scan.
3. Press the + UP /- DOWN button to to tilt Up/Down the image.
4. Press the OK button to exit scan mode.
Parent Unit Menu Options
appears on the screen.
button on the Parent Unit and speak
button.
.
.
17