Position Of Connection Points; Sercos Address Selector Switches - Bosch REXROTH IndraDrive Mi KSM01 Operating Instructions Manual

38/69 Bosch Rexroth AG
Instructions for Use
5.3.2

Position of Connection Points

5.3.3

SERCOS Address Selector Switches

components are tested for high voltage and insulation in accordance
with EN 50178.
CAUTION
Do not connect and disconnect live connections.
S5 SERCOS address selector switch (10×)
S4 SERCOS address selector switch (1×)
X2 Serial interface (RS232)
X3.1, X3.2 Hybrid cable
X7 MultiMediaCard
X37, X38 Digital inputs/outputs
2. Second connection point of equipment grounding conductor
Fig.5-4: Connection Points KSM
CAUTION
Before examining the address which has been set, always switch power off
and then remove connector.
DOK-INDRV*-KSM01******-IT01-EN-P
Rexroth IndraDrive Mi Distributed Servo Drive KSM01
Risk of damage to the drive controller by con‐
necting and disconnecting live connections!
Risk of damage!