Installation procedure
Keyboard
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 29.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Remove the base cover assembly. See "Base cover assembly" on page 30.
Removal procedure
Note: You might be instructed to slide the keyboard frame forward or backward in some of the following
steps. In this case, ensure that you do not press or hold the keys while sliding the keyboard frame.
Otherwise, the keyboard frame cannot be moved.
34
L13 Gen 3, L13 Yoga Gen 3, S2 Gen 7, and S2 Yoga Gen 7 User Guide
and print the following instructions.