Display Orientation; Image Rotation; Options - Panasonic TH-75EQ1W Operating Instructions Manual

Display orientation

Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
On-screen display angle is for horizontal
installation.
[Portrait]:
The on-screen display rotates clockwise by 90
degrees for easy view in the portrait setting.
Power indicator
43-inch model
18:00
Note
●
In the portrait setting, the power indicator shall come
to the right side.

Image rotation

Sets the picture rotation in the portrait setting.
[Off]:
Pictures are not rotated.
[180 degrees]:
Pictures are rotated 180 degrees.
Note
●
This function does not operate when [Display
orientation] is [Landscape].
Setting [Position] when the display is installed
vertically
Even if the display is installed vertically, when [Image
rotation] is set to [Off], the adjustment direction of the
position and size is the same as that of horizontal
installation. When [Image rotation] is set to [180
degrees], the adjustment direction becomes opposite
of that in [Off] state. (see page 39)
Note these points for adjustment.
72
English
Power indicator
75-inch model 65-inch model
55-inch model 50-inch model
Power indicator
86-inch model

Options

This menu displays the information of this unit, and
restores data to the factory default state.
[Options] - submenu screen
Options
Display information
Software licenses
Cloning password
USB data cloning
LAN data cloning
Output log data
Shipping
■
[Display information]
Displays the serial number and software version of this
unit.
■
[Software licenses]
Displays the software license.
■
[Cloning password]
Sets the password for the cloning function.
For more detail of the settings, see "Changing the
cloning password". (see page 114)
Note
●
The initial password in the factory default state is
[AAAA].
●
Change the password periodically, and set one which
is difficult to guess.
●
For initialization method for the cloning password,
consult the dealer where you purchased the product.
■
[USB data cloning], [LAN data cloning]
Copies the data of a single display to multiple displays
by using the USB memory device or via LAN. For more
detail of the settings, see "Using data cloning". (see
page 111)
■
[Output log data]
Saves a log for servicing to the USB memory device.
■
[Shipping]
Restores the data of this unit to the factory default state.
For more detail of the settings, see "Shipping condition".
(see page 121)