Safety Precautions; Symbols Used In This Manual; Installing The Software - Fujitsu fi-6400 Getting Started

Safety Precautions

The provided "Safety Precautions" document con-
tains important information about the safe use of
the scanner. Before using the scanner, make sure
to read and understand the information provided
in the "Safety Precautions" document.
Symbols Used in This
Manual
The following symbols are used in this manual.
Symbol
This symbol alerts operators to an
operation that, if not strictly
WARNING
observed, may result in severe
injury or death.
This symbol alerts particularly
important information. Be sure to
read this information.
This symbol alerts operators to
helpful advice regarding opera-
tion.

Installing the Software

Bundled Software
The following software are bundled with the scanner:
 PaperStream IP (TWAIN) Driver
Conforms to the TWAIN standard. Used when
you operate the scanner using TWAIN-compli-
ant applications.
 PaperStream IP (ISIS) Driver
Conforms to the ISIS standard. Used when you
operate the scanner using ISIS-compliant
applications.
 2D Barcode for PaperStream
This option can recognize two dimensional codes.
Can be used with the PaperStream IP
(TWAIN) driver, the PaperStream IP (ISIS)
driver, or PaperStream Capture.
For details about the installation, refer to
readme in the 2D Barcode for PaperStream
Setup CD-ROM.
 Software Operation Panel
Configure various settings such as the opera-
tion of the scanner and managing the consum-
ables. Installed together with the PaperStream
IP (TWAIN) driver and PaperStream IP (ISIS)
driver.
Description
 Error Recovery Guide
Shows the error status and countermeasures
when an error occurs. Installed together with
the PaperStream IP (TWAIN) driver and
PaperStream IP (ISIS) driver.
 PaperStream Capture
An image scanning application that supports
the PaperStream IP (TWAIN) driver and
PaperStream IP (ISIS) driver. By defining scan
settings as document profiles, you can custom-
ize the settings according to your preference.
 Manual
Includes Safety Precautions, Getting Started
and Operator's Guide.
 Scanner Central Admin Agent
Used to centralize the management of multiple
scanners, by allowing you to apply firmware
updates simultaneously, monitor the operating
status, and check the scanner information.
Note that required applications will differ
depending on the form of operation.
For details, refer to the Scanner Central Admin
User's Guide.
 fi Series Online Update
An application that checks for the software
updates for fi Series, and runs the updates.
 Other Software (Legacy for fi-6800)
Software that were bundled with older versions
of scanners are also included.
TWAIN Driver
Conforms to the TWAIN standard. Used
when you operate the scanner using
TWAIN-compliant applications.
ISIS Driver
Conforms to the ISIS standard. Used when
you operate the scanner using ISIS-compli-
ant applications.
Image Processing Software Option
A software option featuring advanced
binarization of scanned images. Can be
installed together with the scanner drivers
(TWAIN/ISIS).
ScandAll PRO
A TWAIN/ISIS-compliant image scanning
software. You can define scanning settings
as batch profiles, to suit your various opera-
tion requirements. By defining scanning
settings as batch profiles, you can easily
perform scans in accordance with various
operation requirements. Download and
install the software from the download web
page.
2