Installing And Removing An M.2 Module; Installing An M.2 Module - Fujitsu ESPRIMO D55 Series Operating Manual

System expansions

Installing and removing an M.2 module

Installing an M.2 module

► Remove the casing cover (see chapter
► Fold out the drive cage (see chapter
► Insert the M.2 module (b) at a slight angle in the direction of the arrow
(1) into the slot (a) on the mainboard.
► Secure the M.2 module on the mainboard with the screw or the plastic holder (2).
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover onto the casing again (see chapter
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
56
"Removing the casing cover", Page
"Opening the drive cage", Page
"Reattaching the casing cover.", Page
32).
43).
a
1
b b
"Closing the drive cage", Page
2
44).
33).
Fujitsu