Figure 30. Remove two screws and then remove the camera bracket
Screw specifications
M1.6 × L2.0
Go to
https://support.lenovo.com/partslookup
replacement part:
Camera bracket
Remove the microphone rubbers
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the LCD unit" on page 45
"Remove the LCD bezel" on page 48
"Remove the camera bracket" on page 48
Step 1.
Remove the microphone rubbers from the camera board.
Number of screws
2
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
49