Helpful Hints - Philips VR624CAT Hook-Up Instructions

Hookup pages
Hide thumbs Also See for VR624CAT:
Table of Contents

Advertisement

The instructions on this page show you how to copy tapes. The illustration uses two VCRs just like yours.
Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.
1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2
VCR 1
Playing VCR
AUDIO
ANT
IN
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
Audio and Video cables are not supplied.
1
Make the connections shown above.
2
VCR 1 will play your tape. Put a prerecorded tape in VCR 1.
3
VCR 2 will record your tape. Insert a blank tape in VCR 2.
The VCR must be in VCR position. (The VCR light will appear on
the display panel. If it does not, press the VCR/TV button once.)
4
Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote control at VCR 2. Press the VCR but-
ton, then press Number buttons 0, 0, 1 or 0, 0, 2. (See
Helpful Hints at right.)
6
Press the SPEED button to select SP or SLP at VCR 2.
7
Press the PLAY button on VCR 1 and the RECORD but-
ton on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on VCR 1, then
press the STOP/EJECT button on VCR 2.
VCR 2 - Recording VCR
2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2
Rerecording (Tape Duplication) 33
AUDIO
ANT
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
• If you use the AUDIO and VIDEO IN
Jacks on the back of VCR 2, press
Number buttons 0, 0, 1. AV REAR
will appear on the TV screen. (BLUE
BACKGROUND should be ON.
Details are on page 46.)
• If you use the AUDIO and VIDEO In
Jacks on the front of VCR 2, press
Number buttons 0, 0, 2. AV FRONT
will appear on the TV screen. (BLUE
BACKGROUND should be ON.
Details are on page 46.)
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• If a program has copyright protection,
it may not record clearly.
IN
3. RF coaxial cable
from the OUT jack of
VCR 2 to the TV's
ANTENNA IN Jack

Helpful Hints

Advertisement

Table of Contents
loading

Table of Contents