Network Menu - Panasonic PT-VX400NTE Operating Instructions Manual

NETWORK menu

WIred LAN→ See page 10
„
You can make detailed wired LAN settings.
Wireless LAN → See page 11
„
You can select wireless LAN mode.
Wireless detailed setup →
„
You can make detailed wireless LAN settings.
Projector name→
„
You can change the name of the projector.
Password→ See page 16
„
Set this to [ON] if you want to restrict the connection by setting a password when connecting with the projector
using the "Wireless Manager mobile edition 5.5".
When using the deliver image to all function or the delivered image deletion function of the "Multi Projector
Monitoring & Control Software", image cannot be delivered to the projector with [PASSWORD] set to [ON]. To
use these image delivery functions, set it to [OFF]. (Default: OFF).
You can also change the password for the network connection.
Network control→
„
This sets the network control method.
Live mode cut in→
„
Set this to [ON] if you allow another user in the live mode to cut in while you are in the live mode (sending the
screen images) using the "Wireless Manager mobile edition 5.5".
(Default: OFF)
Computer search →
„
You can search computers that can connect using the "Wireless Manager mobile edition 5.5".
Multi-live→ See page 18
„
Use this when connecting with a computer using the "Wireless Manager mobile edition 5.5".
Network status→
„
This displays the network status of the main unit.
AMX D.D.→ See page 20
„
This function alows the projector to be detected by AMX Device Discovery.
Memory viewer→
„
You can make a presentation or project an image without using computers or some other external equipment.
Network factory default→
„
You can reset the network settings to the factory default settings of the projector.
8
See page 11
See page 15
See page 17
See page 17
See page 18
See page 19
See page 38
See page 20