JVC XV-S45GD Instructions Manual page 16

Getting started
To connect to a TV with the component video input jacks
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details
how to make them active.
Blue
Green
The unit
DIGITAL OUT VIDEO OUT
PCM / STREAM COMPONENT
Y P B
COAXIAL
OPTICAL
RIGHT
S-VIDEO VIDEO
AUDIO OUT
Red
• Connect “Y” to “Y ,” “P
NOTE
• When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(optional).
How to make the COMPONENT VIDEO OUT jacks active
Either the COMPONENT VIDEO OUT jacks or the S-VIDEO jack can be active. In the initial (factory preset) condition, the S-
VIDEO jack is active while the COMPONENT VIDEO OUT jacks are not active.
To change the active jack(s) from the initial S-VIDEO to COMPONENT VIDEO, use the following procedure.
%
When the unit is turned on
Press and hold down the
“S-VIDEO” (the current setting) appears in the display window after a few seconds,.
(Display Window)
Keep holding down the
After a few more seconds, “COMPONENT” replaces “S-VIDEO” in the display window.
Now the COMPONENT VIDEO jacks are active.
(Display Window)
• To change the active jack(s) from the COMPONENT VIDEO to the S-VIDEO jack, use the similar procedure.
"
Component video cable
Red
(not supplied)
P R
LEFT
White
Audio/Video cable (not supplied)
* * 4 4
” to ”P ,” “P ” to “P ” correctly.
%
(STOP) button on the front panel when no disc is inserted or while the unit is stopped.
VCDVD
TITLE TRACK CHAP
PROGRAM
RANDOM
%
(STOP) button on the front panel.
VCDVD TITLE TRACK CHAP
PROGRAM
RANDOM
AV COMPU LINK
TV
: except XV-S30BK
White
Red
A - B
1
A - B
1
Blue
Green
Red
IN
Y P B P R
S-VIDEO
VIDEO
IN
LEFT
AUDIO
RIGHT