Table of Contents
Advertisement
Recording
Counter display
You can change a counter display that indicates how much time has elapsed during recording or
playback.
1
Touch the LCD monitor while the recording
screen is displayed.
≥ Operation icons will be displayed.
2
Touch
to switch the counter display.
COUNT
≥ The display will be switched in the following order:
Time Code # Recording Counter # Off
Counter display
Time Code
Recording Counter
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame)
Frame rates in [REC FORMAT]
[TCG]
Sets the way the time code will move.
Select the menu.
MENU
: [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]:
[REC RUN]:
≥ [FREE RUN] is automatically selected during PRE-REC.
≥ It is automatically set to [REC RUN] in following cases:
j During Super Slow Recording
j During the Interval Recording
TC 00:00:00:00
(l
61)
(In Recording Mode)
0:00:00 or SCN 0:00:00
(In Playback Mode)
SCN 0:00:00
≥ In Recording Mode, display will change depending on the
setting of the [REC COUNTER].
≥ In Playback Mode, display will return to SCN 0:00:00 for
each scene.
50.00p/50.00i/25.00p
It will constantly move.
It will move only when recording.
(l
73)
(l
123)
Indications
(l
72, 124)
- 60 -
RESET COUNT DISP/
MODE O.I.S. BARS ZEBRA
Frame
0 to 24
Advertisement
Table of Contents
