Table of Contents
Advertisement
Installing/Removing the
Side Discharge Chute
1. Lift up the lock on
the side discharge door.
2. Lift open the side
discharge door.
3. Install the side discharge chute and close the
door onto the chute.
4. To remove the side
discharge chute, reverse
the steps above.
Important: Push down
on the lock after you
close the side discharge
door.
7
Operation
Starting the Engine
1. Firmly push in the
primer 3 times with your
thumb, holding the
primer in for a second
before releasing it each
time.
m-5583
Note: If the air
temperature is below
55 F (13 C), firmly push
the primer in 5 times.
2. Hold the blade
control bar (A) against
the handle.
m-5584
3. Start the engine using the recoil starter.
m-5585
4. If the mower does not start in 1 or 2 pulls, press
the primer button 1 or 2 times and try starting it again.
m-5676
3329-238
m-5572
A
m-5644
m-5645
Advertisement
Table of Contents
