Serial Port Setting
Use the Serial Port Setting window to console serial port setting, config Baud Rate and Auto Logout setting.
To view this window, click System Configuration > Serial Port Settings as shown below:
The following fields can be set:
Parameter
Baud Rate
Select the baud rate used for the console serial port.
Auto Logout
To configure console logout time, choose 2, 5, 10, 15 minutes or never logout from the pull-down
menu.
Web Settings
Web-based management is Enabled by default. If you choose to disable this by selecting Disabled, you will lose the
ability to configure the system through the web interface as soon as these settings are applied.
To view this menu, click the Web Settings link in the Quick Configuration menu as shown below:
Telnet Settings
Telnet configuration is Enabled by default. If you do not want to allow configuration of the system through Telnet
choose Disabled. The TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet
protocol is 23.
To view this menu, click the Telnet Settings link in the Quick Configuration menu as shown below:
DAS-3626 VDSL2 Switch User Manual
Figure 19. Serial Port Settings
Description
Figure 20. Web Settings menu
Figure 21. Telnet Settings menu
18