Operation; Connecting To A Power Source - Toro Power Shovel 38361 Operator's Manual

Hide thumbs Also See for Power Shovel 38361:
Table of Contents

Advertisement

Setup
1
Positioning the Assist
Handle
No Parts Required
Procedure
1.
Move and rotate the assist handle to a position that is
comfortable for you.
2.
Tighten the knob.
2
Adjusting the Power
Shovel
Height
No Parts Required
Procedure
1.
Set the shaft to a height that is comfortable for you.
Figure 1
2.
Tighten the knob.

Operation

Important:
This appliance is intended for outdoor,
residential use only. Do not use it indoors or for commercial
or industrial purposes.
Connecting to a Power
Source
To reduce the risk of electric shock, this appliance has a
polarized plug (i.e., one blade is wider than the other). Use only
g001328
a polarized plug, UL-listed (CSA certified in Canada) extension
cord recommended for outdoor use. A polarized plug will fit in a
polarized cord only one way. If the plug does not fit fully in the
cord, reverse the cord. If it still does not fit, purchase a polarized
extension cord. If you have a polarized extension cord and the
extension cord plug does not fit fully into the wall receptacle,
reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the appliance or
extension cord plug in any way.
Use only an extension cord recommended for outdoor use.
DANGER
Contact with water while operating the appliance could
cause electric shock, causing injury or death.
Do not handle the plug or the appliance with wet
hands or while standing in water.
Use only an extension cord recommended for
outdoor cold-weather use.
Extension Cord Length
25 feet
50 feet
100 feet
150 feet
Note:
Do not use an extension cord over 150 feet.
Important:
Check the extension cord frequently during
use for holes or cracks in the insulation. Do not use a
4
Figure 2
Minimum Wire Gauge
(A.W.G.)
18
16
14
12
g001329

Advertisement

Table of Contents
loading

Table of Contents