Table of Contents
Advertisement
Changing settings at Hometronic Manager
Changing alarm telephone numbers
Here you enter the two telephone numbers called by the HCI 300 in
an alarm situation. The HCI 300 calls the first and second telephone
numbers three times in an alternating fashion until the call is
confirmed with the pound key (#).
In the "Alarm Parameter Menu" turn
►
the Input button to the left while
"Alarm Phone No. 1" is selected.
Press the Input button.
►
The following text is displayed:
Press the Input button and change the selected number by turning the
►
Input button.
Press the Input button.
►
The changed number is saved. The cursor flashes at the next
position.
The voice message begins 5 seconds after the call is
accepted. By putting a "P" (pause) after the telephone
number, you can delay the start of the voice message. Each
"P" entered delays the voice message by the duration
between two rings.
32
Alarm Parameter Menu
Current values:
Alarm Phone No. 1
Alarm Phone No. 2
Alarm Phone No. 1
0¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
¦¦¦¦¦
>
>
OK
Advertisement
Table of Contents
