Usb Board - HP 340 G5 Maintenance And Service Manual

USB board

Table 5-12 USB board and cable descriptions and part numbers
Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1)
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the USB board to the computer.
3. Remove the USB board from the computer (3).
Reverse this procedure to install the USB board.
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 31).
27).
27).
29).
Spare part number
L24483-001
L23186-001