Advertisement
5. OPERATION
WARNING! Ensure you read, understand and apply the safety instructions in Section 1 and follow the manufacturer's
‰
instructions on the underbody coating container.
5.1.
Screw the gun nose (fig.2.A.) and the suction tube (fig.2.B.) to the gun body (fig.2.C.).
5.2.
Screw on a canister of underbody coating.
5.3.
Ensure air supply is regulated to no more than 90psi and then attach air hose to the gun.
5.4.
Aim the nozzle of the gun into a safe area and depress the gun trigger to check for correct operation. Airflow may be adjusted by use
of the regulator (fig.2.D.).
6. MAINTENANCE
WARNING! Ensure the gun is disconnected from the air supply before attempting any maintenance. It is very important to keep the
‰
gun and components clean to ensure free passage for the underbody coating.
6.1.
Clean all items thoroughly after use with paraffin and allow to dry before storage.
.
fig.2
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AK42 Issue:5 (1,F) 01/06/20
Advertisement
