Related Manuals for Sony WEGA KV-XV29
Summary of Contents for Sony WEGA KV-XV29
- Page 1 2-664-898-11 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-XV29 © 2005 Sony Corporation...
- Page 2 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 3: Table Of Contents
Table of Contents Installation Menu Adjustment Securing the TV ........4 Introducing the WEGA GATE navigator ..........12 Getting Started ........5 Setting up your TV “Settings” Adjustment ...... 13 (“Initial Setup”) ........6 Changing the “Picture” setting ..14 Changing the “Sound”... -
Page 4: Installation
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. (1) Put a cord or chain through the clamps. -
Page 5: Getting Started
x Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... -
Page 6: Setting Up Your Tv ("Initial Setup")
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “ ” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel. - Page 7 d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press 1) To label, press V or v to select the alphanumeric characters for the label.
-
Page 8: Overview Of Controls
Overview of Controls TV front and rear panels TV rear panel L(MONO) WEGA GATE SOUND PROG MODE TV front panel L(MONO) WEGA GATE SOUND PROG MODE Button/Terminal Function Page Remote control sensor. Standby indicator. Wake Up indicator. Turn off or turn on the TV. PROG +/–... -
Page 9: Using The Remote Control And Basic Functions
Using the remote control and basic functions PROG WEGA WEGA GATE RETURN RETURN GATE Button Description Page Turn off temporarily or turn on the TV. – Display the TV program. – Jump to last program number that has been – watched for at least five seconds. - Page 10 continued Button Description Page WEGA GATE menu operations Confirm selected items. WEGA GATE Display or cancel the WEGA GATE menu. Select and adjust items. V, v, B, b RETURN Return to the previous level. Timer operations Set TV to turn on automatically according to the –...
-
Page 11: Advanced Operations
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. Selecting the picture mode Press to select the desired picture mode. Select To view “Vivid”... -
Page 12: Menu Adjustment
Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see page 6) Select Confirm Select... -
Page 13: Settings" Adjustment
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. ”Picture”... -
Page 14: Changing The "Picture" Setting
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is Picture Picture Mode: Vivid selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: Select... -
Page 15: Changing The "Sound" Setting
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” Sound Sound Mode: Dynamic icon ( ), then press Sound Adjustment Balance Intelligent Volume: Surround:... -
Page 16: Changing The "Channel Setup" Setting
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels and sort or edit the channels. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” Channel Setup Auto Program icon (... - Page 17 Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. Manual Program Program: (1) Make sure “Program” is selected, then press TV System: VHF Low Fine: Auto (2) Press V or v until the program number you want Signal Booster: Auto to preset appears on the menu, then press...
-
Page 18: Changing The "Setup" Setting
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, label the connected equipment, select the color system and reset your TV to factory settings. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup”... -
Page 19: Additional Information
Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) Audio/Video cable (not supplied) Camcorder TV rear panel Antenna cable (not supplied) Audio/Video cable (not supplied) DVD Player Note • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 17). - Page 20 continued Connecting to the component video input terminal ( TV rear panel Component video cable (not supplied) DVD player Audio cable (not supplied) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to (component video input) on your TV.
-
Page 21: Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see page 19). • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see page 17). - Page 22 TV. • Count the number of times the 1 (standby) indicator flashes. The 1 (standby) indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
-
Page 23: Specifications
Specifications KV-XV29M50 Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 Channel coverage VHF : E2 to E12 /UHF : E21 to E69 / CATV : S01 to S03, S1 to S41 UHF : B21 to B68 /CATV : S01 to S03, S1 to S41 VHF : C1 to C12, R1 to R12 /...