Honeywell MultiLED PRO Combi SET-10 Instructions

Dimensions drawing:
Common Installation Steps:
1
MultiLED PRO can be used as an emergency luminaire or an exit sign. See the next page for mounting
methods. Below some common steps to follow.
Step 1: Place a flat blade screwdriver to the transparent legend from the main body by pressing gently on
the retaining clips as shown in picture.
Step 2: Place a flat blade screwdriver to dismantle the the mounting part from the main body as shown in
picture.
Step 3: Set the module address. For more information about module settings see the next page.
Technical description
Part no.:
Operation Voltage:
Maximum Power Consumption:
Lumen output
Produced in accordance with:
Ambient Temperature Range:
Relative Humidity:
Degress of cover protection:
Technical lifetime (light source):
Weight:
At the end of their useful life the packaging and product should
be disposed of via a suitable recycling centre. Do not dispose of
with your normal household waste. Do not burn.
Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway
MultiLED PRO
2
MultiLED PRO Combi SET-10 IP40 230V w/pict Centr
EN 60598-1, EN 60598-2-22, EN 55015
EN 61547, EN 61000-3-2, EN 61000-3-3
3
138010.S10
220-240V AC/DC, 50-60 Hz
3.6W / 4VA
350lm
o
-10 to 60 C
Up to 95%
IP40
> 100000 hours
400 gr
http://www.hls-nordic.com
GB