Assembling The Shaft Drive Assembly; Installing The Rear Arm - Yamaha PW50W 2007 Service Manual

1
ASSEMBLING THE SHAFT DRIVE ASSEM-
BLY
1. Lubricate:
9 Drive pinion gear
9 Ring gear
2. Install:
9 Drive pinion gear
9 Shim
9 Bearing
9 Spacer
9 Bearing
3. Install:
1
9 Screw 1
2
(with the special tool 2)
4. Install:
9 Ring gear
9 O-ring
9 Housing cover

INSTALLING THE REAR ARM

1. Apply:
1
9 Yamaha bond No. 1215 (Three Bond No.
1215  ) 1
(to the mating surfaces of both arm ends)
NOTE:
Clean the contacting surface of rear arm ends
before applying the sealant.
2. Tighten:
9 Rear arm bolt
4-38
CHAS
SHAFT DRIVE
Recommended lubricant
Lithium-soap-based grease
50 Nm (5.0 m·kg, 36 ft·lb)
Hexagon wrench:
90890-01307, YM-01307
Yamaha bond No. 1215
(Three Bond No. 1215
90890-85505
26 Nm (2.6 m·kg, 29 ft·lb)
 
)