Laser Pegs 1000 Manual

1000 Please read this manual before you begin!
Failure to follow this manual's instructions may
result in damage to the Triangle Power Base, AC
For Boys And Girls Adapter and/or Laser Pegs®. Not adhering to
these instructions will void the manufacturer's
Ages 5 And Up
warranty. The packaging must be kept because
30 Models+
it contains important information.
WARNING:
ANY CREATION YOU CAN BUILD
CHOKING HAZARD
-
Small parts.
LIGHTED
Not for children under 3 yrs.
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 38 Laser Pegs®
• 159 Construction parts
• Laser Pegs® Peg Cord
• Triangle Power Base
• Instruction Manual
Construction Compatible
Compatible with other construction kits
Requires 3-AA Batteries
EN71, RoHS COMPLIANT
Batteries NOT
Included This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x3
There is No LED In The 90 Degree Peg
Y PEG
x8
x2
x4 x6
x7
90° PEG
SQUARE
SQUARE 45° PEG
WHEEL PEG
PEG
M-M PEG
Each Laser Peg® is color coded on the circuit board inside
Color
each shape. There is No LED In The 90 Degree Peg.
Code
Laser Pegs ® Stackable
Laser Pegs
® link that
Triangle Power Laser Pegs
allows you to connect to
Base Peg Cord
other construction kits.
Construction Parts List
x6
x7
x20
x5
x2
x10
x16
x7
x4
x2
x2
x2
x2
x10
x8
x2
x6
x4
x2
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. To build away from the
Triangle Power Base, use the Peg Cord in one of the top three peg holes to
light up your model! The 90° Pegs are essential to construction but they DO
NOT LIGHT UP.
Red
Push button to
Button Power
turn on/off
Push Red Power Button to
cycle through 3 different
light settings
OFF/ON/FLASH/FLASH FASTER.
AC Adapter
Connection
Connect Laser Pegs® TRIANGLE POWER BASE
Connect cord to model.
To build away from the Laser Pegs® When you remove a peg from another
peg or model DO NOT PULL ON CORD!
Triangle Power Base use the Peg
x4 Cord in one of the top three holes to
illuminate your model!
Replacing Batteries
1. Remove the three (3) screws.
STRAIGHT
2. Place three (3) AA batteries in the correct
T-PEG
x4
position - as displayed inside the Triangle
Power Base. (Batteries are to be inserted
with the correct polarity.)
3. Reassemble the Triangle Power Base.
4. Replace the three (3) screws.
5. Push RED Power Button to turn on!
STACKABLE
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the Triangle Power Base.
9. Never connect more than 200 Laser Pegs®
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. The supply terminals are not to be short-
circuited.
®
Using an
AC Adapt
er
Remove all batteries
x4
from Laser Pegs® Power
x14
Base before using the
5-volt AC adapter.
x4
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
x10
the peg holes.
The AC Adapter and the Triangle Power Base are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event of such
x5
damage, they must not be used until the damage has been repaired.
x5
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will light up (typically
the reds and yellows) and some won't. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
ASTRONAUT - Without gravity, astronaut spines expand and make them up to 3% taller in space.
ASTRONAUT
Model
Difficulty
Level
Peg Holes
A
STEP
1
Add 3-AA Batteries
3-AA Batteries
Remove LR-44 Batteries
The LR-44 batteries are only for the
"Try-Me" function, they should be re-
moved from the Triangle Power Base
and replaced with 3 - "AA" batteries
before giving it to the child.
When using an AC
Adapter, NEVER
place the Adapter
STEP
plug into the Tri-
2
angle Power Base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5-volt
(2000mA) AC Adapter.
STEP
3
STEP
4
STEP
5
www.LaserPegs.com
Copyright 2013© All Rights Reserved Global & Multiple Patents Pending.
US Patent #7,731,558