Kenwood KFC-PST20 - Compression Tweeter Manual

SPECIFICATIONS

IMPORTANT SAFETY INSTRUCTIONS

To avoid the risk of human injury or property damage, be sure to read and observe the following safety cautions.

Have a specialist install and connect the speaker. — Incorrect installation may lead to vehicle accident or malfunction.

Avoid unstable installation. — Make sure that the speaker will not rattle or displace. Otherwise, a displaced speaker may cause injury.

Do not modify the speaker. — Otherwise, smoke or fire may result.

Do not touch the speaker. — The speaker becomes hot after extended operation. Touching it in such a condition may cause burns.

Control listening volume at an optimum level. — If the sound outside the vehicle is inaudible, a traffic accident may result.

In case of abnormality, stop the use and disconnect the speaker. — If operation is continued, smoke or fire may result. Disconnect the speaker and ask servicing.

Use a level that does not harm your sensitive hearing. — Always use the equipment at a level that is not uncomfortable for your ears. Too high a volume level may damage your sense of hearing. Be sure to use the equipment at a safe level for your hearing.

NOTE:
Always begin the audio level adjustment from a low volume level. Then slowly increase the level until the one at which you can listen to the sound comfortably and clearly. Once the optimum level has been set, use the equipment at the same level thereafter.

SYSTEM CONNECTIONS

NOTES:

• Connect to an amplifier with a rated (RMS) power equal to or lower than that of the speaker. — If the rated (RMS) power of the amplifier is higher than that of the speaker, increase the speakers and connect them in series or reduce the speaker input power.

• Be sure to use the supplied Passive crossover network.

Information on Disposal of Old Electrical and Electronic Equipment (applicable for countries that have adopted separate waste collection systems)

Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:
JVC KENWOOD Corporation
3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:
JVCKENWOOD Nederland B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands