DeWalt DCG409VS Manual page 24

English
Accessory Type
Application
Dual
Purpose
Dual Purpose Abrasive Wheel
(combined
cut‑off and
grinding)
Wheel‑Type Wire Brush
Wire
Brushing
Cup Type Wire Brush
Flap Disc (Type 27 / Type 29)
Sanding
Flexible Abrasive
(e.g. sandpaper)
(supported by a flexible
backing pad)
non‑approved Wheels for
DCg409Vs, DCg416Vs
hubbed Wheel Wrench
22
Accessory
guidelines for guards and Accessories for DCg409Vs, DCg416Vs
Hubbed wheel wrench available at additional
cost from your local D
WALT service centre
D
E
guard
Type A (Closed cut off)
1
Maximum wheel thickness, 6 mm.
Type A or Type B (Closed cut off or Grinding)
2
Type B guard available at additional cost from your local D
5
Maximum wire wheel thickness, 20mm.
Type B (Grinding)
2
Type B guard available at additional cost from your local D
Type B (Grinding)
2
Type B guard available at additional cost from your local D
Guard not required
6
Rubber backing pad and sanding clamp nut (included with rubber backing pad) available at additional cost from your
local D WALT dealer or authorised D
E E
Type 11 / T11
WALT dealer or authorised
E
.
Correct Assembly
WALT dealer or authorised D
E
WALT dealer or authorised D
E
WALT dealer or authorised D
E
WALT service centre.
1
2, 5
WALT service centre.
E
2
WALT service centre.
E
2
WALT service centre.
E
6