Electric Connection; Water Connection; Before Installation - Beko BFFD3626SS User Manual

Installation
-Upper hinge group is fixed with 3 screws.
-The hinge cover is attached after the sockets are
installed.
- Then the hinge cover is fixed with two screws.

3.4 Electric connection

A
WARNING:
extension cables or multi-plugs.
B
WARNING:
be replaced by the Authorized Service
Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
• Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Do not extension cords or cordless multiple
outlets between your product and the wall
outlet.
Do not make connections via
Damaged power cable must

3.5 Water connection

Depending on the model of the refrigerator, you
can connect it either to a demijohn or water mains.
First you must connect the water hose to the
refrigerator.
C
In cases where a demijohn is used, a
separate pump must also be used.
A
WARNING:
any, must be unplugged during connection.
C
Following parts may not be supplied with
your product since they are not required
when using a demijohn.
Check that following part have been delivered
together with the product:
External water filter. (If there is a demijohn
connection; it is not necessary to use a water
filter.)

3.5.1 Before Installation

Make sure that you have everything necessary
to ensure proper installation before proceeding,
including:
Your product comes with an internal water filter for
use inside the fridge. Part number of the filter is
4918450200 and you can use this part number
when ordering replacement filters.
9/ 29 EN
Refrigerator and the pump, if
Refrigerator / User Manual