Paper Jam, Skew And Staple Detection Handling - Canon imageFORMULA DR-G2140 Service Manual

10) When the output has finished, a popup
window will be displayed.
Figure 1-319
COPYRIGHT © CANON ELECTRONICS INC. 2018
4. Paper Jam, Skew and Staple
the following message is displayed on the
display panel and feeding stops.
Note: Refer to the "I. Error Display' in Chap-
double feed is detected, and any documents
remaining in the eject tray or scanner must
be removed.
Note: Be careful removing any documents
Note: Remove all documents remaining in-
1) Remove any documents remaining in the
2) Pull and hold the open/close lever, and
Note: When opening and closing the upper
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 1 GENERAL DESCRIPTION
Detection Handling
If a feeding error occurs during scanning,
ter 5 for the details of error message
and error code.
Figure 1-320
When the paper jam, skew, staple or
remaining inside the scanner. Other-
wise document could be damaged or
unexpected injury from paper cuts may
occur.
side the scanner. Any torn paper re-
maining may cause paper jams or trou-
bles.
eject tray.
open the unit smoothly until it stops.
unit, be careful not to get your fingers
caught.
1-13